BESEN Φορτιστής Ηλεκτρικών Οχημάτων SQW45-BC-22KW-APP
εως 36 δόσεις με πιστωτική κάρτα
Χρειάζεσαι Βοήθεια; Συμπλήρωσε τα στοιχεία σου για να σε καλέσουμε άμεσα!
Έως 36 Δόσεις. Δείτε το πλάνο δόσεων:
TBI Bank
Buy Now Pay Later.
4 δόσεις 0% επιτόκιο, 20€ έως 300€
3 έως 60 δόσεις 300€ έως 100.00€
- 1. Αποστολή με ACS Courier
- 2. Αποστολές με μεταφορικές εταιρίες για ογκώδη αντικείμενα
-
3. Παραλαβή από αυτόματο μηχάνημα BoxNow:
Με την BoxNow μπορείς να παραλάβεις το δέμα σου από Αυτόματο Μηχάνημα Παραλαβής που βρίσκεται κοντά σου, όλες τις ώρες της ημέρας 24/7. Η υπηρεσία έχει χρέωση 3€. Υπάρχει δυνατότητα αντικαταβολής με επιπλέον χρέωση 1€.
-
4. Παραλαβή από το κατάστημα:
Λεωφ. Ελ. Βενιζέλου 73(πρώην Θησέως), Καλλιθέα
Συμπληρώστε τον ταχυδρομικό κωδικό για να λάβετε εκτίμηση τρόπου και κόστους μεταφορικών.
-
BrandBESEN
-
Model / MPNSQW45-22KW-APP (BS20-BC-22KW / BS20-BC-22KW-APP family)
-
SKU / EAN5905156104617
-
Product TypeWall-mounted EV charging station (wallbox)
-
Maximum Output Power22 kW (3-phase)
-
Maximum Current32 A
-
Phase Support3-phase (22 kW); single-phase operation possible on other configs
-
Connector TypeType 2 (IEC 62196-2) / J1772 compatible
-
CableTethered versions exist; cable length not specified
-
DisplayColor LCD (approx. 3.5") showing time, voltage, power, status
-
ConnectivityWi‑Fi and Bluetooth (app control). Some listings reference OCPP support for certain SKUs
-
App FeaturesRemote start/stop, scheduling/timers, charging history, firmware updates
-
Protection FeaturesOverload, short circuit, over/under-voltage, overheating protection, earth leakage detection, DC 6 mA leakage protection in some configs
-
RCD / RCCBType A with DC 6 mA protection option (depending on model/config)
-
Ingress ProtectionIP66
-
Operating TemperatureRanges listed between -25°C to +55°C (family) and -40°C to +75°C in some listings
-
Relative Humidity0–95% non-condensing
-
AltitudeUp to <2000 m recommended
-
CoolingNatural air cooling
-
Standby Power Consumption< 8 W (typical)
-
Dimensions (HxWxD)~295 × 195 × 65 mm
-
Product Weight~7000 g (7 kg)
-
MaterialsPolycarbonate housing (some listings: black/brushed metal finish available)
-
InstallationWall-mounted; professional electrical installation required
-
CertificationsCE, FCC, RoHS (some listings also list ETL, CSA, REACH depending on region/config)
-
ColorBlack / Brushed metal (varies by listing)
-
Mounting AccessoriesIncluded mounting plate/hardware varies by seller
-
Load BalancingSupported in family/datasheet; availability/manual/auto depends on SKU and firmware
-
Standards ComplianceIEC 62196-2 (Type 2), general EVSE safety standards
-
Use CasesResidential, commercial, fleet (subject to installer configuration)
-
NotesSome seller pages list model as BS20-BC-22KW-APP; several specification values vary slightly by region/firmware
Αξιολογήσεις
Περιγραφή
Τεχνικά Χαρακτηριστικά
-
BrandBESEN
-
Model / MPNSQW45-22KW-APP (BS20-BC-22KW / BS20-BC-22KW-APP family)
-
SKU / EAN5905156104617
-
Product TypeWall-mounted EV charging station (wallbox)
-
Maximum Output Power22 kW (3-phase)
-
Maximum Current32 A
-
Phase Support3-phase (22 kW); single-phase operation possible on other configs
-
Connector TypeType 2 (IEC 62196-2) / J1772 compatible
-
CableTethered versions exist; cable length not specified
-
DisplayColor LCD (approx. 3.5") showing time, voltage, power, status
-
ConnectivityWi‑Fi and Bluetooth (app control). Some listings reference OCPP support for certain SKUs
-
App FeaturesRemote start/stop, scheduling/timers, charging history, firmware updates
-
Protection FeaturesOverload, short circuit, over/under-voltage, overheating protection, earth leakage detection, DC 6 mA leakage protection in some configs
-
RCD / RCCBType A with DC 6 mA protection option (depending on model/config)
-
Ingress ProtectionIP66
-
Operating TemperatureRanges listed between -25°C to +55°C (family) and -40°C to +75°C in some listings
-
Relative Humidity0–95% non-condensing
-
AltitudeUp to <2000 m recommended
-
CoolingNatural air cooling
-
Standby Power Consumption< 8 W (typical)
-
Dimensions (HxWxD)~295 × 195 × 65 mm
-
Product Weight~7000 g (7 kg)
-
MaterialsPolycarbonate housing (some listings: black/brushed metal finish available)
-
InstallationWall-mounted; professional electrical installation required
-
CertificationsCE, FCC, RoHS (some listings also list ETL, CSA, REACH depending on region/config)
-
ColorBlack / Brushed metal (varies by listing)
-
Mounting AccessoriesIncluded mounting plate/hardware varies by seller
-
Load BalancingSupported in family/datasheet; availability/manual/auto depends on SKU and firmware
-
Standards ComplianceIEC 62196-2 (Type 2), general EVSE safety standards
-
Use CasesResidential, commercial, fleet (subject to installer configuration)
-
NotesSome seller pages list model as BS20-BC-22KW-APP; several specification values vary slightly by region/firmware