Tech-Protect Glass Flex+ Garmin Venu 4 41mm Black [2 PACK]
Χρειάζεσαι Βοήθεια; Συμπλήρωσε τα στοιχεία σου για να σε καλέσουμε άμεσα!
TBI Bank
Buy Now Pay Later.
4 δόσεις 0% επιτόκιο, 20€ έως 300€
3 έως 60 δόσεις 300€ έως 100.00€
- 1. Αποστολή με ACS Courier
- 2. Αποστολές με μεταφορικές εταιρίες για ογκώδη αντικείμενα
-
3. Παραλαβή από αυτόματο μηχάνημα BoxNow:
Με την BoxNow μπορείς να παραλάβεις το δέμα σου από Αυτόματο Μηχάνημα Παραλαβής που βρίσκεται κοντά σου, όλες τις ώρες της ημέρας 24/7. Η υπηρεσία έχει χρέωση 3€. Υπάρχει δυνατότητα αντικαταβολής με επιπλέον χρέωση 1€.
-
4. Παραλαβή από το κατάστημα:
Λεωφ. Ελ. Βενιζέλου 73(πρώην Θησέως), Καλλιθέα
Συμπληρώστε τον ταχυδρομικό κωδικό για να λάβετε εκτίμηση τρόπου και κόστους μεταφορικών.
Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design, just 0.28 mm thick, makes it practically invisible while being extremely durable. Thanks to the ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure while maintaining perfect clarity and full touch sensitivity. The biggest advantage? It doesn’t crack or shatter like traditional tempered glass!
Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.
INSTALLATION INSTRUCTIONS:
1. The installation of this glass model differs from traditional tempered glasses that are adhered with a thin layer of adhesive. Due to the thicker glue layer, the process is slightly more demanding and requires precision.
2. Thoroughly clean the watch screen. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use cleaning stickers (dust stickers) to eliminate dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently press it down.
4. If any edge does not adhere properly, the glass has likely been applied unevenly. In this case, it should be peeled off and reapplied until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center towards the edges. Use your finger or a soft cloth to push the air outwards.
6. Due to the nature of the glass’s construction (polishing, milling), fitting may require several minutes of work. After proper installation, the final effect is aesthetic and durable.
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Surface hardness 7H
- Thickness 0.28mm
- Maintains full touch sensitivity
- Precisely fitted
- Dimensions: ø38.1 mm
SET INCLUDES:
2 x Tech-Protect Glass Flex+
2 x Installation kit
Αξιολογήσεις
Περιγραφή
Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design, just 0.28 mm thick, makes it practically invisible while being extremely durable. Thanks to the ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure while maintaining perfect clarity and full touch sensitivity. The biggest advantage? It doesn’t crack or shatter like traditional tempered glass!
Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.
INSTALLATION INSTRUCTIONS:
1. The installation of this glass model differs from traditional tempered glasses that are adhered with a thin layer of adhesive. Due to the thicker glue layer, the process is slightly more demanding and requires precision.
2. Thoroughly clean the watch screen. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use cleaning stickers (dust stickers) to eliminate dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently press it down.
4. If any edge does not adhere properly, the glass has likely been applied unevenly. In this case, it should be peeled off and reapplied until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center towards the edges. Use your finger or a soft cloth to push the air outwards.
6. Due to the nature of the glass’s construction (polishing, milling), fitting may require several minutes of work. After proper installation, the final effect is aesthetic and durable.
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Surface hardness 7H
- Thickness 0.28mm
- Maintains full touch sensitivity
- Precisely fitted
- Dimensions: ø38.1 mm
SET INCLUDES:
2 x Tech-Protect Glass Flex+
2 x Installation kit