Απλή και γρήγορη πληρωμή
Εκπτωτικά Κουπόνια
Εύκολη παρακολούθηση παραγγελίας
Εξατομικευμένες αγορές
![Tech-Protect Glass Fit+ Xiaomi 17T Pro Black [2 PACK]](https://www.techstores.gr/storage/i3commerce/images/8/5/851258.jpg)
![Tech-Protect Glass Fit+ Xiaomi 17T Pro Black [2 PACK]](https://media.techstores.gr/storage/techstores/infocube_image_cache/jpg/127x127x90/i3commerce/images/8/5/851258.webp?v=20260305)
Tech-Protect Glass Fit+ Xiaomi 17T Pro Black [2 PACK]
Χρειάζεσαι Βοήθεια; Συμπλήρωσε τα στοιχεία σου για να σε καλέσουμε άμεσα!
TBI Bank
Buy Now Pay Later.
4 δόσεις 0% επιτόκιο, 20€ έως 300€
3 έως 60 δόσεις 300€ έως 100.00€
- 1. Αποστολή με ACS Courier
- 2. Αποστολές με μεταφορικές εταιρίες για ογκώδη αντικείμενα
-
3. Παραλαβή από αυτόματο μηχάνημα BoxNow:
Με την BoxNow μπορείς να παραλάβεις το δέμα σου από Αυτόματο Μηχάνημα Παραλαβής που βρίσκεται κοντά σου, όλες τις ώρες της ημέρας 24/7. Η υπηρεσία έχει χρέωση 3€. Υπάρχει δυνατότητα αντικαταβολής με επιπλέον χρέωση 1€.
-
4. Παραλαβή από το κατάστημα:
Λεωφ. Ελ. Βενιζέλου 73(πρώην Θησέως), Καλλιθέα
Συμπληρώστε τον ταχυδρομικό κωδικό για να λάβετε εκτίμηση τρόπου και κόστους μεταφορικών.
Product Description
Tech-Protect Glass Fit+ is tempered glass that combines protection with aesthetics. Precisely milled edges and minimal thickness make the glass almost disappear on the screen while maintaining full touch sensitivity. A hardness of 9H on a ten-point scale means that the glass withstands contact with keys, coins, and other sharp objects that you carry in your pocket every day. With a thickness of just 0.3 mm, it hardly changes the profile of your smartphone and does not affect the screen's responsiveness. The tempered material disperses impact force, protecting the display from cracks during falls.
Product Features
- 100% Original
- Packaged in original packaging
- Glass hardness 9H
- Thickness of only 0.3 mm
- Oleophobic coating reducing fingerprints
- Precisely milled edges
- Compatible with most cases
Specifications
| Type | Tempered glass |
| Coating | Oleophobic |
| Hardness | 9H |
| Dimensions | 159.23 x 74.25 mm |
| Compatibility | Xiaomi 17T Pro |
The set includes
- 2 × Tech-Protect Glass Fit+ tempered glass
- 2 × Installation kit
Installation Instructions
- Start the installation in the bathroom right after a shower - the steam will absorb all the dust from the air and it won't interfere with your installation.
- Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
- Install the coating as evenly as possible - you can position it using two small pieces of tape attached to the side of the device.
- Remove air bubbles by pressing down firmly in circular motions for several seconds. Do this so that the adhesive layer bonds with the screen as strongly as possible.
Αξιολογήσεις
Περιγραφή
Product Description
Tech-Protect Glass Fit+ is tempered glass that combines protection with aesthetics. Precisely milled edges and minimal thickness make the glass almost disappear on the screen while maintaining full touch sensitivity. A hardness of 9H on a ten-point scale means that the glass withstands contact with keys, coins, and other sharp objects that you carry in your pocket every day. With a thickness of just 0.3 mm, it hardly changes the profile of your smartphone and does not affect the screen's responsiveness. The tempered material disperses impact force, protecting the display from cracks during falls.
Product Features
- 100% Original
- Packaged in original packaging
- Glass hardness 9H
- Thickness of only 0.3 mm
- Oleophobic coating reducing fingerprints
- Precisely milled edges
- Compatible with most cases
Specifications
| Type | Tempered glass |
| Coating | Oleophobic |
| Hardness | 9H |
| Dimensions | 159.23 x 74.25 mm |
| Compatibility | Xiaomi 17T Pro |
The set includes
- 2 × Tech-Protect Glass Fit+ tempered glass
- 2 × Installation kit
Installation Instructions
- Start the installation in the bathroom right after a shower - the steam will absorb all the dust from the air and it won't interfere with your installation.
- Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
- Install the coating as evenly as possible - you can position it using two small pieces of tape attached to the side of the device.
- Remove air bubbles by pressing down firmly in circular motions for several seconds. Do this so that the adhesive layer bonds with the screen as strongly as possible.
