Tech-Protect Glass Fit+ Samsung Galaxy Watch 8 Classic 46mm Clear [2 PACK]
Χρειάζεσαι Βοήθεια; Συμπλήρωσε τα στοιχεία σου για να σε καλέσουμε άμεσα!
TBI Bank
Buy Now Pay Later.
4 δόσεις 0% επιτόκιο, 20€ έως 300€
3 έως 60 δόσεις 300€ έως 100.00€
- 1. Αποστολή με ACS Courier
- 2. Αποστολές με μεταφορικές εταιρίες για ογκώδη αντικείμενα
-
3. Παραλαβή από αυτόματο μηχάνημα BoxNow:
Με την BoxNow μπορείς να παραλάβεις το δέμα σου από Αυτόματο Μηχάνημα Παραλαβής που βρίσκεται κοντά σου, όλες τις ώρες της ημέρας 24/7. Η υπηρεσία έχει χρέωση 3€. Υπάρχει δυνατότητα αντικαταβολής με επιπλέον χρέωση 1€.
-
4. Παραλαβή από το κατάστημα:
Λεωφ. Ελ. Βενιζέλου 73(πρώην Θησέως), Καλλιθέα
Συμπληρώστε τον ταχυδρομικό κωδικό για να λάβετε εκτίμηση τρόπου και κόστους μεταφορικών.
Tempered glass Tech-Protect Glass Fit+ is a high-quality protective accessory made from lightweight and precisely machined glass with a thickness of just 0.3mm.
The perfectly fitted design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates to exceptional scratch resistance during everyday use.
The glass features crystal-clear transparency, preserving the natural colors and sharpness of the display. An additional advantage is the special oleophobic coating that effectively minimizes the accumulation of fingerprints and other contaminants on the surface of the glass, making it easier to keep it clean.
* Due to the various edge machining of the displays, a slight air halo may form around the screen after installing the protective film/glass. This is a natural situation and depends on the machining of the screen in the specific device.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after a bath - the steam will absorb all the dust from the atmosphere and it won't interfere with your installation.
2) Thoroughly clean and degrease the surface of the screen, then polish it to a shine with a dry cloth.
3) Install the coating as evenly as you can - you can reposition it using two stickers, sticking them to the side of the device.
4) Get rid of air bubbles by firmly pressing the entire surface in circular motions for several dozen seconds. Do this so that the adhesive layer bonds with the screen as firmly as possible.
PRODUCT FEATURES:
- 100% Original
- Packaged in original packaging
- Hardness 9H
- Cut to the flat part of the display
- 2.5D beveled edges, pleasant to the touch
- Additional oleophobic layer
- Perfect transparency
- Does not affect touch functionality
- Dimensions: ø34 mm
SET INCLUDES:
2 x Glass Tech-Protect Glass Fit+
2 x Installation kit
Αξιολογήσεις
Περιγραφή
Tempered glass Tech-Protect Glass Fit+ is a high-quality protective accessory made from lightweight and precisely machined glass with a thickness of just 0.3mm.
The perfectly fitted design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates to exceptional scratch resistance during everyday use.
The glass features crystal-clear transparency, preserving the natural colors and sharpness of the display. An additional advantage is the special oleophobic coating that effectively minimizes the accumulation of fingerprints and other contaminants on the surface of the glass, making it easier to keep it clean.
* Due to the various edge machining of the displays, a slight air halo may form around the screen after installing the protective film/glass. This is a natural situation and depends on the machining of the screen in the specific device.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after a bath - the steam will absorb all the dust from the atmosphere and it won't interfere with your installation.
2) Thoroughly clean and degrease the surface of the screen, then polish it to a shine with a dry cloth.
3) Install the coating as evenly as you can - you can reposition it using two stickers, sticking them to the side of the device.
4) Get rid of air bubbles by firmly pressing the entire surface in circular motions for several dozen seconds. Do this so that the adhesive layer bonds with the screen as firmly as possible.
PRODUCT FEATURES:
- 100% Original
- Packaged in original packaging
- Hardness 9H
- Cut to the flat part of the display
- 2.5D beveled edges, pleasant to the touch
- Additional oleophobic layer
- Perfect transparency
- Does not affect touch functionality
- Dimensions: ø34 mm
SET INCLUDES:
2 x Glass Tech-Protect Glass Fit+
2 x Installation kit