Tech-Protect Glass Fit+ Samsung Galaxy Watch 8 / 9 40mm Clear [2 PACK]
Χρειάζεσαι Βοήθεια; Συμπλήρωσε τα στοιχεία σου για να σε καλέσουμε άμεσα!
TBI Bank
Buy Now Pay Later.
4 δόσεις 0% επιτόκιο, 20€ έως 300€
3 έως 60 δόσεις 300€ έως 100.00€
- 1. Αποστολή με ACS Courier
- 2. Αποστολές με μεταφορικές εταιρίες για ογκώδη αντικείμενα
-
3. Παραλαβή από αυτόματο μηχάνημα BoxNow:
Με την BoxNow μπορείς να παραλάβεις το δέμα σου από Αυτόματο Μηχάνημα Παραλαβής που βρίσκεται κοντά σου, όλες τις ώρες της ημέρας 24/7. Η υπηρεσία έχει χρέωση 3€. Υπάρχει δυνατότητα αντικαταβολής με επιπλέον χρέωση 1€.
-
4. Παραλαβή από το κατάστημα:
Λεωφ. Ελ. Βενιζέλου 73(πρώην Θησέως), Καλλιθέα
Συμπληρώστε τον ταχυδρομικό κωδικό για να λάβετε εκτίμηση τρόπου και κόστους μεταφορικών.
Tempered glass Tech-Protect Glass Fit+ is a high-quality protective accessory made from lightweight and precisely milled glass with a thickness of only 0.3mm.
The perfectly fitting design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates to exceptional scratch resistance during everyday use.
The glass features crystal clarity, maintaining the natural colors and sharpness of the display. An additional advantage is the special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other contaminants on the glass surface, making it easier to keep it clean.
* Due to the diverse milling of display edges, a slight air halo may form around the screen after the installation of the protective film/glass. This is a natural situation and depends on the milling of the screen in a given specimen.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after a bath - the steam will absorb all the dust from the air and it won't interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then polish it to a shine using a dry cloth.
3) Install the coating as evenly as you can - you can reposition it using two small pieces, sticking them to the side of the device.
4) Remove air bubbles by pressing down firmly in circular motions for several seconds. Do this so that the adhesive layer bonds with the screen as tightly as possible.
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Hardness 9H
- Cut to the flat part of the display
- 2.5D milled edges, pleasant to the touch
- Additional oleophobic layer
- Perfect clarity
- Does not affect touch functionality
- Dimensions: ø37 mm
THE SET INCLUDES:
2 x Glass Tech-Protect Glass Fit+
2 x Installation kit
Αξιολογήσεις
Περιγραφή
Tempered glass Tech-Protect Glass Fit+ is a high-quality protective accessory made from lightweight and precisely milled glass with a thickness of only 0.3mm.
The perfectly fitting design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates to exceptional scratch resistance during everyday use.
The glass features crystal clarity, maintaining the natural colors and sharpness of the display. An additional advantage is the special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other contaminants on the glass surface, making it easier to keep it clean.
* Due to the diverse milling of display edges, a slight air halo may form around the screen after the installation of the protective film/glass. This is a natural situation and depends on the milling of the screen in a given specimen.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after a bath - the steam will absorb all the dust from the air and it won't interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then polish it to a shine using a dry cloth.
3) Install the coating as evenly as you can - you can reposition it using two small pieces, sticking them to the side of the device.
4) Remove air bubbles by pressing down firmly in circular motions for several seconds. Do this so that the adhesive layer bonds with the screen as tightly as possible.
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Hardness 9H
- Cut to the flat part of the display
- 2.5D milled edges, pleasant to the touch
- Additional oleophobic layer
- Perfect clarity
- Does not affect touch functionality
- Dimensions: ø37 mm
THE SET INCLUDES:
2 x Glass Tech-Protect Glass Fit+
2 x Installation kit