Tech-Protect Glass Fit+ Samsung Galaxy Tab A9 / A11 8.7 X110 / X115 / X133 / X135 Clear [2 PACK]
Χρειάζεσαι Βοήθεια; Συμπλήρωσε τα στοιχεία σου για να σε καλέσουμε άμεσα!
TBI Bank
Buy Now Pay Later.
4 δόσεις 0% επιτόκιο, 20€ έως 300€
3 έως 60 δόσεις 300€ έως 100.00€
- 1. Αποστολή με ACS Courier
- 2. Αποστολές με μεταφορικές εταιρίες για ογκώδη αντικείμενα
-
3. Παραλαβή από αυτόματο μηχάνημα BoxNow:
Με την BoxNow μπορείς να παραλάβεις το δέμα σου από Αυτόματο Μηχάνημα Παραλαβής που βρίσκεται κοντά σου, όλες τις ώρες της ημέρας 24/7. Η υπηρεσία έχει χρέωση 3€. Υπάρχει δυνατότητα αντικαταβολής με επιπλέον χρέωση 1€.
-
4. Παραλαβή από το κατάστημα:
Λεωφ. Ελ. Βενιζέλου 73(πρώην Θησέως), Καλλιθέα
Συμπληρώστε τον ταχυδρομικό κωδικό για να λάβετε εκτίμηση τρόπου και κόστους μεταφορικών.
Tempered glass Tech-Protect Glass Fit+ is a high-quality protective accessory made from lightweight and precisely milled glass with a thickness of just 0.3mm.
The perfectly fitted design fully retains the sensitivity of the touch screen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates to exceptional resistance to scratches during everyday use.
The glass features crystal-clear transparency, ensuring that natural colors and sharpness of the display are preserved. An additional advantage is the special oleophobic coating that effectively minimizes the accumulation of fingerprints and other contaminants on the surface of the glass, making it easier to keep clean.
* Due to the diverse milling of display edges, a slight air halo may form around the screen after installing the protective film/glass on the screen! This is a natural occurrence and depends on the milling of the screen in that particular unit.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after a shower - the steam will absorb all the dust from the atmosphere and it won't interfere with the installation.
2) Thoroughly clean and degrease the surface of the screen, and then polish it to a shine using a dry cloth.
3) Install the coating as evenly as possible - you can reposition it using two stickers attached to the side of the device.
4) Remove air bubbles by firmly pressing the entire surface in circular motions for several seconds. Do this so that the adhesive layer bonds as strongly as possible with the screen.
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Hardness 9H
- Cut to the flat part of the display
- 2.5D milled edges that feel nice to the touch
- Additional oleophobic layer
- Perfect transparency
- Does not affect touch functionality
- Dimensions: 206 x 120 mm
SET INCLUDES:
2 x Glass Tech-Protect Glass Fit+
2 x Installation kit
Αξιολογήσεις
Περιγραφή
Tempered glass Tech-Protect Glass Fit+ is a high-quality protective accessory made from lightweight and precisely milled glass with a thickness of just 0.3mm.
The perfectly fitted design fully retains the sensitivity of the touch screen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates to exceptional resistance to scratches during everyday use.
The glass features crystal-clear transparency, ensuring that natural colors and sharpness of the display are preserved. An additional advantage is the special oleophobic coating that effectively minimizes the accumulation of fingerprints and other contaminants on the surface of the glass, making it easier to keep clean.
* Due to the diverse milling of display edges, a slight air halo may form around the screen after installing the protective film/glass on the screen! This is a natural occurrence and depends on the milling of the screen in that particular unit.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after a shower - the steam will absorb all the dust from the atmosphere and it won't interfere with the installation.
2) Thoroughly clean and degrease the surface of the screen, and then polish it to a shine using a dry cloth.
3) Install the coating as evenly as possible - you can reposition it using two stickers attached to the side of the device.
4) Remove air bubbles by firmly pressing the entire surface in circular motions for several seconds. Do this so that the adhesive layer bonds as strongly as possible with the screen.
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Hardness 9H
- Cut to the flat part of the display
- 2.5D milled edges that feel nice to the touch
- Additional oleophobic layer
- Perfect transparency
- Does not affect touch functionality
- Dimensions: 206 x 120 mm
SET INCLUDES:
2 x Glass Tech-Protect Glass Fit+
2 x Installation kit