Tech-Protect Glass Fit+ Garmin Forerunner 55 Clear [2 PACK]
Χρειάζεσαι Βοήθεια; Συμπλήρωσε τα στοιχεία σου για να σε καλέσουμε άμεσα!
TBI Bank
Buy Now Pay Later.
4 δόσεις 0% επιτόκιο, 20€ έως 300€
3 έως 60 δόσεις 300€ έως 100.00€
- 1. Αποστολή με ACS Courier
- 2. Αποστολές με μεταφορικές εταιρίες για ογκώδη αντικείμενα
-
3. Παραλαβή από αυτόματο μηχάνημα BoxNow:
Με την BoxNow μπορείς να παραλάβεις το δέμα σου από Αυτόματο Μηχάνημα Παραλαβής που βρίσκεται κοντά σου, όλες τις ώρες της ημέρας 24/7. Η υπηρεσία έχει χρέωση 3€. Υπάρχει δυνατότητα αντικαταβολής με επιπλέον χρέωση 1€.
-
4. Παραλαβή από το κατάστημα:
Λεωφ. Ελ. Βενιζέλου 73(πρώην Θησέως), Καλλιθέα
Συμπληρώστε τον ταχυδρομικό κωδικό για να λάβετε εκτίμηση τρόπου και κόστους μεταφορικών.
Tempered glass Tech-Protect Glass Fit+ is a high-quality protective accessory made from lightweight and precisely milled glass with a thickness of only 0.3mm.
The perfectly fitted design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates to exceptional scratch resistance during everyday use.
The glass features crystal clear transparency, allowing natural colors and sharpness of the display to be maintained. An additional advantage is the special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other contaminants on the glass surface, thus making it easier to keep it clean.
* Due to the varied milling of display edges, a delicate air halo may form around the screen after installing the protective film/glass. This is a natural situation and depends on the milling of the screen in each individual unit.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after a shower - the steam will absorb all the dust from the atmosphere and it won't interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then polish it to a shine with a dry cloth.
3) Install the coating as evenly as possible - you can reposition it using two strips by sticking them to the side of the device.
4) Remove air bubbles by pressing down firmly in circular motions for several dozen seconds. Do this so that the adhesive layer bonds with the screen as strongly as possible.
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Hardness 9H
- Cut to the flat part of the display
- 2.5D milled edges that feel nice to the touch
- Additional oleophobic layer
- Ideal transparency
- Does not affect touch functionality
- Dimensions: ø 35 mm
2 x Installation kit
Αξιολογήσεις
Περιγραφή
Tempered glass Tech-Protect Glass Fit+ is a high-quality protective accessory made from lightweight and precisely milled glass with a thickness of only 0.3mm.
The perfectly fitted design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates to exceptional scratch resistance during everyday use.
The glass features crystal clear transparency, allowing natural colors and sharpness of the display to be maintained. An additional advantage is the special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other contaminants on the glass surface, thus making it easier to keep it clean.
* Due to the varied milling of display edges, a delicate air halo may form around the screen after installing the protective film/glass. This is a natural situation and depends on the milling of the screen in each individual unit.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after a shower - the steam will absorb all the dust from the atmosphere and it won't interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then polish it to a shine with a dry cloth.
3) Install the coating as evenly as possible - you can reposition it using two strips by sticking them to the side of the device.
4) Remove air bubbles by pressing down firmly in circular motions for several dozen seconds. Do this so that the adhesive layer bonds with the screen as strongly as possible.
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Hardness 9H
- Cut to the flat part of the display
- 2.5D milled edges that feel nice to the touch
- Additional oleophobic layer
- Ideal transparency
- Does not affect touch functionality
- Dimensions: ø 35 mm
2 x Installation kit