Tech-Protect Glass Fit+ Apple iPad Pro 11” 2024/2025 Clear [2 PACK]
Χρειάζεσαι Βοήθεια; Συμπλήρωσε τα στοιχεία σου για να σε καλέσουμε άμεσα!
TBI Bank
Buy Now Pay Later.
4 δόσεις 0% επιτόκιο, 20€ έως 300€
3 έως 60 δόσεις 300€ έως 100.00€
- 1. Αποστολή με ACS Courier
- 2. Αποστολές με μεταφορικές εταιρίες για ογκώδη αντικείμενα
-
3. Παραλαβή από αυτόματο μηχάνημα BoxNow:
Με την BoxNow μπορείς να παραλάβεις το δέμα σου από Αυτόματο Μηχάνημα Παραλαβής που βρίσκεται κοντά σου, όλες τις ώρες της ημέρας 24/7. Η υπηρεσία έχει χρέωση 3€. Υπάρχει δυνατότητα αντικαταβολής με επιπλέον χρέωση 1€.
-
4. Παραλαβή από το κατάστημα:
Λεωφ. Ελ. Βενιζέλου 73(πρώην Θησέως), Καλλιθέα
Συμπληρώστε τον ταχυδρομικό κωδικό για να λάβετε εκτίμηση τρόπου και κόστους μεταφορικών.
Tempered glass Tech-Protect Glass Fit+ is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of just 0.3mm.
The perfectly fitted design fully retains the sensitivity of the touchscreen. The manufacturer rates its hardness at 9H on a ten-point scale, which translates to exceptional scratch resistance during everyday use.
The glass features crystal-clear transparency, ensuring that natural colors and sharpness of the display are preserved. An additional advantage is the special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other contaminants on the glass surface, making it easier to keep clean.
* Due to the various edge milling of the displays, a slight air halo may appear around the screen after the protective film/glass is installed! This is a natural situation and depends on the milling of the screen on that particular device.
How to check if a given accessory fits your iPad?
It's simple, check the model number on the back of the device, which starts with the letter A:
This product fits: A2836, A2837, A3006, A3357 A3358 A3359.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after a bath - the steam will absorb all the dust from the atmosphere and it won't interfere with your installation.
2) Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
3) Install the coating as evenly as possible - you can position it using two small pieces of tape, sticking them to the side of the device.
4) Remove air bubbles by pressing the entire surface with circular motions for several seconds. Do this so that the adhesive layer binds as strongly as possible to the screen.
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Hardness 9H
- Cut to the flat part of the display
- 2.5D milled edges that feel nice to the touch
- Additional oleophobic layer
- Perfect transparency
- Does not affect touch functionality
- Dimensions: 245.9 x 173.90 mm
SET INCLUDES:
2 x Glass Tech-Protect Glass Fit+
2 x Installation kit
Αξιολογήσεις
Περιγραφή
Tempered glass Tech-Protect Glass Fit+ is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of just 0.3mm.
The perfectly fitted design fully retains the sensitivity of the touchscreen. The manufacturer rates its hardness at 9H on a ten-point scale, which translates to exceptional scratch resistance during everyday use.
The glass features crystal-clear transparency, ensuring that natural colors and sharpness of the display are preserved. An additional advantage is the special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other contaminants on the glass surface, making it easier to keep clean.
* Due to the various edge milling of the displays, a slight air halo may appear around the screen after the protective film/glass is installed! This is a natural situation and depends on the milling of the screen on that particular device.
How to check if a given accessory fits your iPad?
It's simple, check the model number on the back of the device, which starts with the letter A:
This product fits: A2836, A2837, A3006, A3357 A3358 A3359.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after a bath - the steam will absorb all the dust from the atmosphere and it won't interfere with your installation.
2) Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
3) Install the coating as evenly as possible - you can position it using two small pieces of tape, sticking them to the side of the device.
4) Remove air bubbles by pressing the entire surface with circular motions for several seconds. Do this so that the adhesive layer binds as strongly as possible to the screen.
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Hardness 9H
- Cut to the flat part of the display
- 2.5D milled edges that feel nice to the touch
- Additional oleophobic layer
- Perfect transparency
- Does not affect touch functionality
- Dimensions: 245.9 x 173.90 mm
SET INCLUDES:
2 x Glass Tech-Protect Glass Fit+
2 x Installation kit