Απλή και γρήγορη πληρωμή
Εκπτωτικά Κουπόνια
Εύκολη παρακολούθηση παραγγελίας
Εξατομικευμένες αγορές
NOMAD Sport Case Apple iPhone 18 Pro / 17 Pro MagSafe (black)
εως 36 δόσεις με πιστωτική κάρτα
Χρειάζεσαι Βοήθεια; Συμπλήρωσε τα στοιχεία σου για να σε καλέσουμε άμεσα!
Έως 36 Δόσεις. Δείτε το πλάνο δόσεων:
TBI Bank
Buy Now Pay Later.
4 δόσεις 0% επιτόκιο, 20€ έως 300€
3 έως 60 δόσεις 300€ έως 100.00€
- 1. Αποστολή με ACS Courier
- 2. Αποστολές με μεταφορικές εταιρίες για ογκώδη αντικείμενα
-
3. Παραλαβή από αυτόματο μηχάνημα BoxNow:
Με την BoxNow μπορείς να παραλάβεις το δέμα σου από Αυτόματο Μηχάνημα Παραλαβής που βρίσκεται κοντά σου, όλες τις ώρες της ημέρας 24/7. Η υπηρεσία έχει χρέωση 3€. Υπάρχει δυνατότητα αντικαταβολής με επιπλέον χρέωση 1€.
-
4. Παραλαβή από το κατάστημα:
Λεωφ. Ελ. Βενιζέλου 73(πρώην Θησέως), Καλλιθέα
Συμπληρώστε τον ταχυδρομικό κωδικό για να λάβετε εκτίμηση τρόπου και κόστους μεταφορικών.
NOMAD Sport Case - etui do iPhone 18 Pro / 17 Pro kompatybilne z MagSafe (black)
NOMAD Sport Case is a back cover case dedicated to the iPhone 18 Pro and 17 Pro, compatible with MagSafe. The design combines a satin back plate with a polycarbonate frame and a TPU bumper, providing protection and comfort of use.
Satin back plate PET
The case features a smooth back plate made of satin PET, which reduces the visibility of fingerprints and dust. The surface is scratch-resistant, making it easier to maintain an aesthetic appearance during everyday use. The smooth structure of the back makes it easy to slide the phone into pockets, while the materials on the edges ensure a secure grip.
Drop protection
The case design is intended to protect the phone from drops from heights of up to approximately 2.44 m. The 2.2 mm thick TPU bumper surrounds the device on all sides, and the raised edges protect the screen and camera from direct contact with surfaces. The internal microfiber lining additionally cushions impacts.
Metal buttons of the case
The case is equipped with precise buttons made of anodized aluminum, which provide tactile feedback when operating the phone. Additionally, the Camera Control button is made of glass. The buttons are interchangeable, allowing for easy replacement without interfering with other parts of the case.
MagSafe and Qi2 magnets
The Sport Case is compatible with MagSafe and Qi2 thanks to the integrated system of neodymium magnets coated with nickel. This system provides a magnetic force of approximately 7.85-10.79 N and includes a positioning magnet that allows for the correct alignment of accessories requiring a specific orientation.
Lanyard slot
The case features a recessed area for attaching a wrist strap anchor, located on the inside of the case. Installation is done by placing the holder in the recess and threading the ring through the USB-C port hole, allowing for discreet and stable lanyard attachment.
Specifications
| Compatibility | iPhone 18 Pro / 17 Pro compatible with MagSafe |
| Back plate material | satin PET |
| Frame material | polycarbonate |
| Bumper material | TPU |
| Camera ring material | TPU |
| Lining | protective microfiber |
| Camera Control button | glass |
| Buttons | anodized aluminum |
| Drop protection | up to approximately 2.44 m |
| Height of edges above the screen (bottom) | 0.85 mm |
| Height of edges above the screen (sides and top) | 1 mm |
| Bumper thickness | 2.2 mm |
| Magnets | neodymium, coated with nickel |
| Magnetic force | approximately 7.85-10.79 N |
Installation guide
- To remove the button, it must be firmly pushed out from the outside of the case.
- The new button is installed from the inside by pressing it until it clicks securely into place.
Notes
With intensive and prolonged use, signs of wear may appear on the back plate.
Αξιολογήσεις
Περιγραφή
NOMAD Sport Case - etui do iPhone 18 Pro / 17 Pro kompatybilne z MagSafe (black)
NOMAD Sport Case is a back cover case dedicated to the iPhone 18 Pro and 17 Pro, compatible with MagSafe. The design combines a satin back plate with a polycarbonate frame and a TPU bumper, providing protection and comfort of use.
Satin back plate PET
The case features a smooth back plate made of satin PET, which reduces the visibility of fingerprints and dust. The surface is scratch-resistant, making it easier to maintain an aesthetic appearance during everyday use. The smooth structure of the back makes it easy to slide the phone into pockets, while the materials on the edges ensure a secure grip.
Drop protection
The case design is intended to protect the phone from drops from heights of up to approximately 2.44 m. The 2.2 mm thick TPU bumper surrounds the device on all sides, and the raised edges protect the screen and camera from direct contact with surfaces. The internal microfiber lining additionally cushions impacts.
Metal buttons of the case
The case is equipped with precise buttons made of anodized aluminum, which provide tactile feedback when operating the phone. Additionally, the Camera Control button is made of glass. The buttons are interchangeable, allowing for easy replacement without interfering with other parts of the case.
MagSafe and Qi2 magnets
The Sport Case is compatible with MagSafe and Qi2 thanks to the integrated system of neodymium magnets coated with nickel. This system provides a magnetic force of approximately 7.85-10.79 N and includes a positioning magnet that allows for the correct alignment of accessories requiring a specific orientation.
Lanyard slot
The case features a recessed area for attaching a wrist strap anchor, located on the inside of the case. Installation is done by placing the holder in the recess and threading the ring through the USB-C port hole, allowing for discreet and stable lanyard attachment.
Specifications
| Compatibility | iPhone 18 Pro / 17 Pro compatible with MagSafe |
| Back plate material | satin PET |
| Frame material | polycarbonate |
| Bumper material | TPU |
| Camera ring material | TPU |
| Lining | protective microfiber |
| Camera Control button | glass |
| Buttons | anodized aluminum |
| Drop protection | up to approximately 2.44 m |
| Height of edges above the screen (bottom) | 0.85 mm |
| Height of edges above the screen (sides and top) | 1 mm |
| Bumper thickness | 2.2 mm |
| Magnets | neodymium, coated with nickel |
| Magnetic force | approximately 7.85-10.79 N |
Installation guide
- To remove the button, it must be firmly pushed out from the outside of the case.
- The new button is installed from the inside by pressing it until it clicks securely into place.
Notes
With intensive and prolonged use, signs of wear may appear on the back plate.
