Απλή και γρήγορη πληρωμή
Εκπτωτικά Κουπόνια
Εύκολη παρακολούθηση παραγγελίας
Εξατομικευμένες αγορές
Matte GrizzGlass CarDisplay Protection Volkswagen VW Transporter T7 Discover Pro 10" (2024-2026)
εως 36 δόσεις με πιστωτική κάρτα
Χρειάζεσαι Βοήθεια; Συμπλήρωσε τα στοιχεία σου για να σε καλέσουμε άμεσα!
Έως 36 Δόσεις. Δείτε το πλάνο δόσεων:
TBI Bank
Buy Now Pay Later.
4 δόσεις 0% επιτόκιο, 20€ έως 300€
3 έως 60 δόσεις 300€ έως 100.00€
- 1. Αποστολή με ACS Courier
- 2. Αποστολές με μεταφορικές εταιρίες για ογκώδη αντικείμενα
-
3. Παραλαβή από αυτόματο μηχάνημα BoxNow:
Με την BoxNow μπορείς να παραλάβεις το δέμα σου από Αυτόματο Μηχάνημα Παραλαβής που βρίσκεται κοντά σου, όλες τις ώρες της ημέρας 24/7. Η υπηρεσία έχει χρέωση 3€. Υπάρχει δυνατότητα αντικαταβολής με επιπλέον χρέωση 1€.
-
4. Παραλαβή από το κατάστημα:
Λεωφ. Ελ. Βενιζέλου 73(πρώην Θησέως), Καλλιθέα
Συμπληρώστε τον ταχυδρομικό κωδικό για να λάβετε εκτίμηση τρόπου και κόστους μεταφορικών.
GRIZZ MatteScreen
⭐ Why Buy CarDisplay Protection
✔️ absorbs fingerprints
✔️ eliminates light reflections
✔️ perfectly fitted
✔️ excellent scratch protection
✔️ does not affect touch functionality
⭐ What is Matte CarDisplay Protection Film?
Matte film is a type of protective coating that reduces glare and light reflections on the screen, which improves visibility and readability of the information displayed on the screen in various lighting conditions.
⭐ Reduces Fingerprints and Smudges
Compared to a glossy surface, the matte surface reduces the visibility of oily marks and dirt that may be left by fingers.
⭐ 100% Touch Sensitivity
The film is coated with a layer that minimizes the number of fingerprints and greasy smudges. The touch sensitivity and glide of the finger are just like the device's screen.
⭐ Reliability
Thanks to its flexibility, Grizz CarDisplay Protection does not crack or shatter, and at the same time adheres perfectly to the screen. The comfort of use remains unchanged - at the highest level.
⭐ Perfect Fit
Using laser technology, the film is perfectly cut to fit the screen of your device. Perfectly matched to the screen and almost invisible. Forget about air bubbles on the edges.
⭐ Installation Instructions
- Clean the screen thoroughly. Peel off the middle protective layer with the START sticker.
- Align the film perfectly from all sides and run your finger through the center of the film.
- Pressing down with your hand on one part of the film, remove the next part of the START layer underneath.
- Pressing down with your hand on the other part of the film, remove the remaining part of the START layer underneath.
- Remove the FINISH layer by pulling the sticker. Guide the protective film parallel to the screen. Remove the remaining air using a squeegee. To remove any dust from under the film, use DustStix.
⭐ In the installation set, you will receive:
1x squeegee
2x dry cloth
4x DustStix
1x original packaging
Αξιολογήσεις
Περιγραφή
GRIZZ MatteScreen
⭐ Why Buy CarDisplay Protection
✔️ absorbs fingerprints
✔️ eliminates light reflections
✔️ perfectly fitted
✔️ excellent scratch protection
✔️ does not affect touch functionality
⭐ What is Matte CarDisplay Protection Film?
Matte film is a type of protective coating that reduces glare and light reflections on the screen, which improves visibility and readability of the information displayed on the screen in various lighting conditions.
⭐ Reduces Fingerprints and Smudges
Compared to a glossy surface, the matte surface reduces the visibility of oily marks and dirt that may be left by fingers.
⭐ 100% Touch Sensitivity
The film is coated with a layer that minimizes the number of fingerprints and greasy smudges. The touch sensitivity and glide of the finger are just like the device's screen.
⭐ Reliability
Thanks to its flexibility, Grizz CarDisplay Protection does not crack or shatter, and at the same time adheres perfectly to the screen. The comfort of use remains unchanged - at the highest level.
⭐ Perfect Fit
Using laser technology, the film is perfectly cut to fit the screen of your device. Perfectly matched to the screen and almost invisible. Forget about air bubbles on the edges.
⭐ Installation Instructions
- Clean the screen thoroughly. Peel off the middle protective layer with the START sticker.
- Align the film perfectly from all sides and run your finger through the center of the film.
- Pressing down with your hand on one part of the film, remove the next part of the START layer underneath.
- Pressing down with your hand on the other part of the film, remove the remaining part of the START layer underneath.
- Remove the FINISH layer by pulling the sticker. Guide the protective film parallel to the screen. Remove the remaining air using a squeegee. To remove any dust from under the film, use DustStix.
⭐ In the installation set, you will receive:
1x squeegee
2x dry cloth
4x DustStix
1x original packaging
