Απλή και γρήγορη πληρωμή
Εκπτωτικά Κουπόνια
Εύκολη παρακολούθηση παραγγελίας
Εξατομικευμένες αγορές
![Glastify UVTG+ Samsung Galaxy S22 Ultra [2 PACK]](https://www.techstores.gr/storage/i3commerce/images/2/0/203713.jpg)
![Glastify UVTG+ Samsung Galaxy S22 Ultra [2 PACK]](https://media.techstores.gr/storage/techstores/infocube_image_cache/jpg/127x127x90/i3commerce/images/2/0/203713.webp?v=20260305)
Glastify UVTG+ Samsung Galaxy S22 Ultra [2 PACK]
Χρειάζεσαι Βοήθεια; Συμπλήρωσε τα στοιχεία σου για να σε καλέσουμε άμεσα!
TBI Bank
Buy Now Pay Later.
4 δόσεις 0% επιτόκιο, 20€ έως 300€
3 έως 60 δόσεις 300€ έως 100.00€
- 1. Αποστολή με ACS Courier
- 2. Αποστολές με μεταφορικές εταιρίες για ογκώδη αντικείμενα
-
3. Παραλαβή από αυτόματο μηχάνημα BoxNow:
Με την BoxNow μπορείς να παραλάβεις το δέμα σου από Αυτόματο Μηχάνημα Παραλαβής που βρίσκεται κοντά σου, όλες τις ώρες της ημέρας 24/7. Η υπηρεσία έχει χρέωση 3€. Υπάρχει δυνατότητα αντικαταβολής με επιπλέον χρέωση 1€.
-
4. Παραλαβή από το κατάστημα:
Λεωφ. Ελ. Βενιζέλου 73(πρώην Θησέως), Καλλιθέα
Συμπληρώστε τον ταχυδρομικό κωδικό για να λάβετε εκτίμηση τρόπου και κόστους μεταφορικών.
Tempered glass GlasTIFY UVTG+ is made of lightweight and milled AGC glass with a thickness of just 0.28mm.
During the manufacturing process, it was subjected to tempering at 420°C, which gives it a surface hardness of 9H, providing the highest level of protection during everyday use and absorbing impact force.
UVTG+ is bonded using a liquid substance over the entire surface of the screen, which is then cured with a UV lamp. This combination achieves an ideal effect of smoothness, clarity, and responsiveness on a curved screen.
The glass is precisely made and fully functional. Remember that the set includes 2 pieces of glass.
GlasTIFY glass does not need a wider introduction, as it is the absolute "TOP" in the screen protection category.
* The glass is compatible with most cases available on the market, the cutter is "Case Friendly".
** Remember to remove and re-add fingerprints after installing the glass - if applicable.
CHECK HOW EASY INSTALLATION IS: https://youtu.be/bKRgFJ4Rg_w
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom just after a bath - the steam will absorb all the dust from the atmosphere, and it won't interfere with your installation.
2) Level the phone so that it lies flat; otherwise, the glue will flow off the phone and the installation will fail.
Remember to cover the upper speaker with a sticker from the set.
3) Use an alcohol-soaked wipe to thoroughly clean the surface, then polish it with a dry cloth.
4) Remove dust using a sticker.
5) Unscrew the main cap (the glue will not flow) and place the tube in the center of the screen, then gently unscrew the top cap (the glue will start to flow).
6) Remove the protective layer and place the glass on the display; if you place the glass crooked, you can freely slide it as long as the glass is floating on the screen.
Wait for a few seconds until the glue fills the entire surface of the glass.
7) Using a UV lamp, cure the glass in each area for 10 seconds.
8) Clean the phone from any glue residue and re-add fingerprints.
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Hardness 9H
- Adapted to the rounded screen
- 2.5D milled edges that are nice to the touch
- Hydrophobic layer
- Oleophobic layer
- Perfectly clear
- Does not affect touch sensitivity
- Dimensions: 159x74mm
SET INCLUDES:
2 x GlasTIFY Glass
1 x Installation kit
Αξιολογήσεις
Περιγραφή
Tempered glass GlasTIFY UVTG+ is made of lightweight and milled AGC glass with a thickness of just 0.28mm.
During the manufacturing process, it was subjected to tempering at 420°C, which gives it a surface hardness of 9H, providing the highest level of protection during everyday use and absorbing impact force.
UVTG+ is bonded using a liquid substance over the entire surface of the screen, which is then cured with a UV lamp. This combination achieves an ideal effect of smoothness, clarity, and responsiveness on a curved screen.
The glass is precisely made and fully functional. Remember that the set includes 2 pieces of glass.
GlasTIFY glass does not need a wider introduction, as it is the absolute "TOP" in the screen protection category.
* The glass is compatible with most cases available on the market, the cutter is "Case Friendly".
** Remember to remove and re-add fingerprints after installing the glass - if applicable.
CHECK HOW EASY INSTALLATION IS: https://youtu.be/bKRgFJ4Rg_w
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom just after a bath - the steam will absorb all the dust from the atmosphere, and it won't interfere with your installation.
2) Level the phone so that it lies flat; otherwise, the glue will flow off the phone and the installation will fail.
Remember to cover the upper speaker with a sticker from the set.
3) Use an alcohol-soaked wipe to thoroughly clean the surface, then polish it with a dry cloth.
4) Remove dust using a sticker.
5) Unscrew the main cap (the glue will not flow) and place the tube in the center of the screen, then gently unscrew the top cap (the glue will start to flow).
6) Remove the protective layer and place the glass on the display; if you place the glass crooked, you can freely slide it as long as the glass is floating on the screen.
Wait for a few seconds until the glue fills the entire surface of the glass.
7) Using a UV lamp, cure the glass in each area for 10 seconds.
8) Clean the phone from any glue residue and re-add fingerprints.
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Hardness 9H
- Adapted to the rounded screen
- 2.5D milled edges that are nice to the touch
- Hydrophobic layer
- Oleophobic layer
- Perfectly clear
- Does not affect touch sensitivity
- Dimensions: 159x74mm
SET INCLUDES:
2 x GlasTIFY Glass
1 x Installation kit
