ELEGOO Rapid PLA+ Νήμα 3D Εκτύπωσης (Γκρί) 1.75 mm 1kg

Περιγραφή

Τεχνικά Χαρακτηριστικά

• Brand
  ELEGOO
• Product Line
  RAPID PLA+
• Color
  Grey
• Filament Diameter
  1.75 mm
• Dimensional Tolerance
  ±0.02 mm
• Material Type
  PLA+ (rapid/modified PLA)
• Compatibility
  Most 1.75 mm FDM 3D printers
• Vacuum Packaging
  Vacuum sealed with desiccant
• Density
  1.20 g/cm³ (listed) / 1.23 g/cm³ (alternate listing)
• Melt Index
  8.2 g/10 min @190°C/2.16kg
• Tensile Strength (XY)
  ≥ 60 MPa (one listing) / 39 ± 2 MPa (alternate)
• Elongation at Break (XY)
  19% (one listing) / 8.5% ±1.2% (alternate)
• Bending Strength
  80 MPa (one listing) / 71 ±6 MPa (alternate)
• Bending Modulus
  2680 MPa (one listing) / 2846 ±175 MPa (alternate)
• Charpy Impact Strength
  3.85 kJ/m² (one listing) / 50.4 ±2.8 kJ/m² (alternate)
• Rockwell Hardness
  88
• Thermal Deformation Temperature
  53°C @0.45 MPa (one listing)
• Vicat/Heat Deflection (alternate listings)
  Vicat ~62°C, HDT ~57°C
• Recommended Nozzle Temp
  200–230°C (220°C recommended)
• Recommended Heated Bed Temp
  40–60°C
• Recommended Fan
  100%
• Recommended Layer Height
  0.2 mm
• Printing Speed
  30–600 mm/s (optimized for high-speed)
• Line Length (1.75 mm)
  ~330–335 m (1 kg spool)
• Spool Weights Available
  1 kg spool, 10 kg pack (regional/sku dependent)
• Packaging Options
  Vacuum-sealed spool with desiccant; sold in 1 kg and 10 kg packs depending on listing
• Typical Uses
  High-speed prototyping, detailed parts with improved toughness
• Environmental
  Biodegradable (PLA-based)
• Notes
  Specs vary slightly across regional/pack-size listings; check product page for the exact spool size and datasheet

Αξιολογήσεις