Simple and fast payment
Discount Coupons
Easy order tracking
Personalized shopping
Transceiver Allnet Switch Modul, DAC(direkt Cable), SFP+/SFP+, 10Gbit, 1m,
εως 36 δόσεις με πιστωτική κάρτα
Need Help? Fill in your details so we can call you immediately!
Πιστωτική Κάρτα
Buy now, pay later με tbi bank
4 installments 0% επιτόκιο, 20€ έως 300€
3 to 60 installments 300€ έως 100.00€
σε όλη την Ελλάδα
Related Products
Transceiver TP-Link ISM311LM network Fiber optic 1.25 Mbit/s SFP 850 nm
Converter TP-Link Omada MC211CS-2 network media 1000 Mbit/s 1310 nm Single-mode Black
Converter TP-Link Omada MC212CS-2 network media 1000 Mbit/s 1550 nm Single-mode Black
Converter Planet 4-Port 1G Ethernet PoE to VDSL2 Extender IVC-234GPT
The ALLNET Switch Module, particularly the ALL4759V2-1 model, is recognized for its high performance and cost-effectiveness. This 10Gbit transceiver is tailored for both 10G Ethernet and 10G Fiber Channel applications.
One of the key features of the ALL4759V2-1 is its high port density and reliability. It operates at a low cost while maintaining a reduced power budget. The use of a passive copper cable assembly ensures that it is perfect for within-rack or rack-to-rack situations.
- Hot-swappable design
- Programmed EEPROM signature for easy detection and configuration
In terms of technical specifications, the ALL4759V2-1 supports data rates of up to 10.5 Gbps. It is available in multiple cable lengths, accommodating various setup requirements. Below are some of its important specifications:
- Cable Length: 0.5m, 1m, 2m, 3m, 5m, 7m
- Wire Gauge: 30 AWG for shorter lengths, 24 AWG for longer lengths
- Temperature Range: 0°C to 70°C
Furthermore, the ALL4759V2-1 is compliant with various electrical standards, ensuring its performance reliability across different environments. It finds applications in a variety of high-performance areas such as:
- 10Gigabit Ethernet
- Data center cabling infrastructure
- Fiber Channel networks
-
Data RateUp to 10.5 Gbps
-
Cable Length1m
-
Wire Gauge30 AWG
-
Connector TypeHot-pluggable SFP+ 20-pin
-
Temperature Range0 °C to 70 °C
-
Differential Impedance100 ± 5 Ohms
-
Time Delay SkewLess than 350 ps/7m
-
NEXTLess than -30 dB at 3.2 GHz
-
AttenuationMaximum attenuation of -21 dB/5.5m at 5 GHz and -33.7 dB/5.5m at 10 GHz for 30 AWG cable
-
Bend Radius5x OD Min
-
Flame TestingVW-1, FT1, FT4 compliant
-
Standards ComplianceUL758, CSA22.2 NO.210 compliant
Ratings
Description
The ALLNET Switch Module, particularly the ALL4759V2-1 model, is recognized for its high performance and cost-effectiveness. This 10Gbit transceiver is tailored for both 10G Ethernet and 10G Fiber Channel applications.
One of the key features of the ALL4759V2-1 is its high port density and reliability. It operates at a low cost while maintaining a reduced power budget. The use of a passive copper cable assembly ensures that it is perfect for within-rack or rack-to-rack situations.
- Hot-swappable design
- Programmed EEPROM signature for easy detection and configuration
In terms of technical specifications, the ALL4759V2-1 supports data rates of up to 10.5 Gbps. It is available in multiple cable lengths, accommodating various setup requirements. Below are some of its important specifications:
- Cable Length: 0.5m, 1m, 2m, 3m, 5m, 7m
- Wire Gauge: 30 AWG for shorter lengths, 24 AWG for longer lengths
- Temperature Range: 0°C to 70°C
Furthermore, the ALL4759V2-1 is compliant with various electrical standards, ensuring its performance reliability across different environments. It finds applications in a variety of high-performance areas such as:
- 10Gigabit Ethernet
- Data center cabling infrastructure
- Fiber Channel networks
Technical Specifications
-
Data RateUp to 10.5 Gbps
-
Cable Length1m
-
Wire Gauge30 AWG
-
Connector TypeHot-pluggable SFP+ 20-pin
-
Temperature Range0 °C to 70 °C
-
Differential Impedance100 ± 5 Ohms
-
Time Delay SkewLess than 350 ps/7m
-
NEXTLess than -30 dB at 3.2 GHz
-
AttenuationMaximum attenuation of -21 dB/5.5m at 5 GHz and -33.7 dB/5.5m at 10 GHz for 30 AWG cable
-
Bend Radius5x OD Min
-
Flame TestingVW-1, FT1, FT4 compliant
-
Standards ComplianceUL758, CSA22.2 NO.210 compliant
